Baseus DGXC-02 lamp with battery and magnetic mount

I already have one similar lamp with a magnetic mount, but unlike the reviewed one, it is extremely difficult to find a use for it, since the magnetic mount in the form of two neodymium tablets hidden inside the lamp body along its flat side allows you to attach the lamp to flat metal surface in only one position. In the house, except for the refrigerator, you can’t hang it anywhere else, and such a use case makes little sense. Designers from Baseus thought about this moment much more seriously and equipped their lamp with a magnetic holder in which it can change the angle of inclination by 80 °.
The Baseus DGXC-02 observation lamp is intended for local illumination of the kitchen sink in the parents’ house. Previously, there was a similar lamp with a motion sensor, but it is inconvenient to use for two reasons: the mount is provided only on the lugs for self-tapping screws, and I did not https://jiji.ug/272-solar-powered-fans want to spoil the furniture categorically, so I grabbed the lamp with plastic ties to the dryer tray.

Accordingly, it is inconvenient to remove and install the lamp, but it is necessary to do this, since its second drawback is the operation from AAA batteries, which had to be regularly pulled out to replace or recharge

The monitored lamp It has a built-in lithium battery and a charging port on the body. It can be charged both at the place of installation in order to keep the illumination of the working area in the kitchen, and near the outlet – the lamp has an easily removable magnetic mount

The lamp is delivered in
oblong illustrated cardboard box

On the reverse side of which the characteristics of the product are indicated in Chinese and Russian

I will give them larger:
Model: DGXC-02
Material: ABS polycarbonate
Rated voltage: 5V
Rated power: 5W
Luminous flux: ≥100 lm
Color rendering index: >80 Ra
Color temperature: 3000K – 5000K
Battery capacity: 1800 mAh
Working time: from 4 hours at maximum brightness to 24 hours at minimum brightness
Dimensions: 284х39х49 mm
Weight: 184g< /p>

The package has a sticker to verify the authenticity of the product

The product is packed securely. Inside there is a https://jiji.sn/cars/toyota-camry-2011 plastic case with soft pads

The lamp and the holder are packed in plastic bags

The kit also comes with a charging cable, warranty card and instructions

Meter cable length with USB Type-C connector

The manual has an original horizontally oriented appearance.

The lamp holder is light, plastic. In its center there is a metal platform curved under the profile of the lamp body

On the reverse side, 3M adhesive tape is pasted over the entire area of ​​the holder

The magnet is strong, holds the lamp very tightly

The size of the lamp turned out to be smaller than I expected. On advertising renderings, it seemed to me big and weighty. Not really. The lamp is only 285 mm long and weighs 185 grams.

The body of the lamp is made of two types of plastic. The main matte white, with a silver edging around the perimeter

The lampshade is made of white matte translucent plastic with a multilayer structure

Under it, you can barely see a line of alternating white and yellow LEDs

An elongated neodymium magnet is installed in the upper part of the housing

To the right of it, the main characteristics of the lamp are indicated

Controls are touch buttons located on the front side of the housing. There is a button in the center
on / off, brightness adjustment on the right, color temperature adjustment on the left. There is a possibility of both fast adjustment and slow adjustment. A short press of the brightness change buttons switches modes: minimum brightness, medium and maximum. Long press smoothly changes the brightness. The color temperature buttons also work: short touches switch modes: cold, mixed and warm light. A long touch changes the color temperature more smoothly.

The charging port is located at the end of the case.

While charging, the white LED on the lamp body lights up. The charging current is 0.7 A. It takes a little more than two hours to fully charge

My tester estimated the accumulated capacity at 1758 mAh (according to passport data 1800 mAh at 5 V)

The buttons do not have tactile protrusions and backlighting; it is not very convenient to use them in the dark. Fortunately, the power button is in the center and finding it in the dark is a matter of habit

Cold light looks like this

Warm light

Mixed light

Illumination of a book at minimum brightness in daylight

At maximum brightness, the picture does not convey the change in illumination, since the camera automatically changed the exposure to the new shooting conditions, this is noticeable by the darkened laminate in the frame
< br /> Let’s check the lamp in the conditions for which it was bought. We are preparing a place to install the holder. Thoroughly degrease the stain
contact

Remove the film from the double-sided adhesive tape. It holds tightly, the edge of the sticky base caught a little with a fingernail when peeling off.

We firmly glue the holder onto the fat-free area of ​​the pallet. We check — it holds tight, the adhesive tape is good

Put the lamp in the holder

Let there be light!

The lamp has an angle of inclination of 80 degrees

For such needs in local lighting, a small area is more than enough

I will not say that the lamp shines like a spotlight , but for such a scenario of using its luminous flux is enough

I liked the lamp. It looks good, has a convenient magnetic mount, several lighting modes, a capacious battery, which, with this use case, is enough for 2-3